|
|
| Price: |
£59.99 inc. VAT |
CL Bowl Turning Bracket
This heavy duty cast iron bowl turning arm and rest can easily be fitted to the lathe for convenient access to the swivelhead functions – easing the turning of bowls and allowing the bigger capacities to be achieved. Can be used on a bench or stand. For use with all CL lathes. Includes CWA180 tubular bowl rest. Please note banjo is not included the existing banjo from the bed bars should used. |
|
|
|
|
| Price: |
£17.99 inc. VAT |
17 Inch Tool Rest
For use when turning long spindles, the advantage of this is because of its increased length the user doesn’t need to move the banjo up and down the bed bars as often. Please note an additional banjo assembly is required to use this product, part no. CLO-L. |
|
|
|
|
| Price: |
£19.99 inc. VAT |
10 Inch Tool Rest
Cast iron 10 inch toolrest, for use with any lathe which has a 3/4 inch dia. stem fixture. |
|
|
|
|
| Price: |
£13.99 inc. VAT |
5 Inch Short Stem Tool Rest
Ideal for small intricate turning, comes into its own on small spindle turning which is less than 10 inches between centres. For use with DML lathes |
|
|
|
|
| Price: |
£9.99 inc. VAT |
No. 1 Morse Taper Arbor
To be used in combination with the CWA140 geared drill chuck, this can then be mounted in the tailstock and used for woodboring. |
|
|
|
|
| Price: |
£8.99 inc. VAT |
No. 1 Morse Taper Arbor
To be used in combination with the CWA150 geared drill chuck, this can then be mounted in the tailstock and used for woodboring. |
|
|
|
|
| Price: |
£9.99 inc. VAT |
Bowl Turning Tool Rest
This tailor made bowl turning rest is a superb addition to any woodturner's accessory drawer. A replacement for the standard toolrest, enabling the tool to be positioned and supported extremely close to the workpiece on the inside of the bowl for maximum control. For use with all Record Power bowl turning brackets. |
|
|
|
|
| Price: |
£19.99 inc. VAT |
| A versatile popular form of chucking, from the most delicate goblets up to 12" wet wood bowls, The wood screw chuck offers a simple safe timber holding solution. Consisting of seven precision machined components, this chuck incorporates incorporates the unique non-slip screw mechanism which guarantees re-alignment of the timber once removed, thus giving the facility to turn both kiln and wet timbers. This type of chuck is commonly used by specialist green woodturners on out of balance workpieces. As ageneral rule on a screw chuck you can turn five times the diameter of the chuck face therfore this chuck is suitable for timber 12" wide. An ideal chucking solution for turning goblets, egg cups and fruit etc. For use on any lathe with a 3/4 x 16tpi spindle. |
|
|
|
|
| Price: |
£12.99 inc. VAT |
| Smaller relation to the CWA61 The CWA62 woodscrew chuck is precision machined to an internal tolerance of +/- 3/10 of a thousandth of an inch, ensuring concentricity, therefore eliminating spiralling and chattering. Suitable for both hard and soft woods. As a general rule on a screw chuck you can turn five times the diameter of the chuck face. This chuck is suitable for timber 7-1/2" wide. An ideal chucking solution for turning small items such as egg cups and fruit etc. For use on any lathe |
|
|
|
|
| Price: |
£12.99 inc. VAT |
| Manufactured from grey iron castings, this 4" faceplate is individually machined on external faces to a tolerances of 1/1000th of an inch. Eight countersunk location holes are goemetrically located to ensure optimum holding position. Woodscrews are not supplied, however we recommend the use of No. 14 Countersink screws, length of screw will vary depending on application. The CWA70 faceplate is suitable for bowls up to 16" For use on any lathe with a 3/4 x 16tpi spindle. |
|
|
|
|
| Price: |
£19.99 inc. VAT |
| Manufactured from grey iron castings, this 6" faceplate is individually machined on external faces to a tolerances of 1/1000th of an inch. Eight countersunk location holes are goemetrically located to ensure optimum holding position. Woodscrews are not supplied, however we recommend the use of No. 14 Countersink screws, length of screw will vary depending on application. The CWA71 faceplate is suitable for bowls up to 30" For use on any lathe with a 3/4 x 16tpi spindle. |
|
|
|
|
| Price: |
£9.99 inc. VAT |
| Large 4 prong centre 7/8" diameter and No. 1 morse taper. Fitted to the headstock for spindle turning, designed with a large head to give extra grip on large section timbers. |
|
|
|
|
| Price: |
£9.99 inc. VAT |
2 Prong Centre
2 prong centre, designed for turning wet or out of balance timbers. This centre allows for greater penetration into timber. No. 1 morse and 5/8" diameter. |
|
|
|
|
| Price: |
£9.99 inc. VAT |
90 Deg. Back Centre
Replacement component for Record Power DML lathes. No. 1 Morse taper |
|
|
|
|
| Price: |
£19.99 inc. VAT |
Revolving Centre
The CWA93 is a revolving centre designed for turning in between centres, but unlike traditional 'dead' centres the revolving action of the CWA93 eliminates scorching of the timber. Machine ground on internal and external faces, the ‘sealed for life’ single bearing resists sideways and downward thrust pressures to enable out of balance timbers to be worked on without preparation. |
|
|
|
|
| Price: |
£24.99 inc. VAT |
Heavy Duty Revolving Centre
The CWA100 is our heavy duty revolving centre and is designed for use with large, heavy timbers whether dry, wet or green. Machine ground on internal and external faces, the ‘sealed for life’ twin bearings resist sideways and downward thrust pressures to enable out of balance timbers to be worked on without preparation. |
|
|
|
|
| Price: |
£19.99 inc. VAT |
1/2 Inch Drill Chuck & Arbor
This combination of drill chuck and No. 1 morse taper is specifically designed to operate in the tailstock of the lathe. Can be used with standard wood boring bits or alternatively for large diameter boring expansive cutters can be used. Three internal gripping jaws are precision ground to perfectly align the boring bits so as to ensure true straight cuts. Comes complete with chuck key. |
|
|
|
|
| Price: |
£29.99 inc. VAT |
DML36SH Bowl Turning
This cast iron bowl turning arm and rest can easily be fitted to the lathe to conveniently access the swivelhead function – easing the turning of bowls and allowing the bigger capacities to be achieved. Suitable for use on a bench or on the legstand. Please note does not include CWA180 tubular bowl rest with standard product. Existing toolrest from lathe can be used. |
|
|
|
|
| Price: |
£59.95 inc. VAT |
Collet Chucking System
The RP3000X1 collet chucking system is an economical work holding solution, a tried and tested design manufactured in steel on CNC machinery, and finished to exacting tolerances. Offering a range of contracting & expanding solutions, a faceplate, screw chuck and pin chuck are all included. For sheer value for money this chuck set cannot be beaten. This chuck set is suitable for all Record Power lathes and any other lathe with 3/4” x 16tpi thread. |
|
|
|
|
| Price: |
£119.95 inc. VAT |
Lever scroll chuck
Manufactured from high quality steel this new chuck is built in the same tradition as the hugely popular RP4000 and is fully compatible with the extensive range of RP4000 jaws. Complete with carrying case, 2 Levers, woodscrew and standard jawset, this lever operated scroll chuck has the strength and accuracy of its larger brother but at a much lower price. A perfectly good choice for the serious woodturner, the economic price also makes it a credible buy for the novice turner who can find the accuracy required for collet chuck systems too demanding. |
|
|
|
|
| Price: |
£159.99 inc. VAT |
Geared Scroll Chuck
Geared scroll chucks have rapidly gained popularity amongst keen woodturners in recent years. Quick one handed operation, powerful gripping power and a wide jaw range offer a high quality work-holding solution for virtually any application. The RP4000 chuck is manufactured from high quality steel and comes with a variety of threads to suit all Record Power lathes and many others. Complete with carrying case 2 ‘T’ handles, indexing plate, woodscrew, standard jawset - expanding from 45mm to 85mm and contracting from 71mm to 31mm. |
|
|
|
|
| Price: |
£34.99 inc. VAT |
RP4000C
35mm Shark Jaws
35mm shark jaws are so called because of their serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. The advantage of these jaws is that they can grip odd shaped pieces such as a tree branch. |
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
